How I improved my green screen setup with some easy steps

I have been trying to take my green screen game to the next level for a while and last night I found the ultimate guide so I thought I would share it. If you are having issues getting good effects with your green screen, take a look at this video (it is not mine). If you think your green screen is really good, I'm sure there's a tip for you in here too! This is the best video I have seen on this subject and I have looked at a lot of them! https://youtu.be/OH8TWTt51W8

Here are some takeaways:

  • Most green screen issues are because of lighting, namely "hot spots" (too much light in one location. Think about green screen lighting separately from the subject (you) lighting. Light up your green screen with bank lights (tall vertical lights) and not spotlights. Here's a video from the same author showing you how to make bank lights for cheap. I will be making those in the next few days and report: https://youtu.be/BpOakYp-gJ4
  • Use an app (iPad, $10) to determine if your screen is evenly lit. Naked eye doesn't cut it.
  • Stay away from the screen so you don't cast a shadow (6-9 feet).
  • Smooth out your green screen (by stretching it or steaming it)
  • Use a backlight (hair light) to pull your subject from the screen (so it doesn't look "flat").
  • Light your subject a little brighter than your screen (see video for details).
  • Don't wear green clothes or clothes with green in it.
  • Blur your background (low f/stop on your camera if you can control that, around f/5.6).
  • Remove motion blur (slightly higher shutter speed, see video for details).
  • Frame your shot correctly so the green screen covers all your movements.
  • Be careful if you have a monitor in front of you connected to your camera as it will reflect green light on you. The trick is to change your saturation to zero to make the screen black and white (love this tip!).
  • Get good lighting for your subject (after lighting your green screen).

Later this week I will be shuffling my studio to apply some of those tips and will keep you posted on the results. I hope this helps someone! Share your green screen tips if you have any that are not on the list.

«1

Comments

  • Abbie
    Abbie Posts: 3,191 traveler rank

    Super helpful info @GregReverdiau
    , thanks for sharing! :smileyvery-happy:

  • Thor
    Thor Posts: 2,331 rolemodel rank

    Awesome tips!

    I think I use most of them, but they were learned through hours of trial and error, so much easier with this :)

  • I will be making a post soon. I just completely redid my green screen setup and man oh man, what a difference!! The biggest difference was using better lights for the screen (homebuilt for cheap too!) and using all the same temperature (color) bulbs. I settled for 5000K but it doesn't really matter. I have almost zero work to do in editing now to get everything color balance and my keyer is 100% spot on with one click.

  • Greg,

    A couple suggestions on this. I worked a lot on this issue and watched a number of good YouTube videos (just search "green screen").

    It is usually recommend that you stand eight to ten feet in front of your green screen, rather than two or three feet in order to reduce the chance of shadows.

    About the f.stop on your lens: I would not try to blur the background, that background being the green screen. If you are using a green screen then you can insert a photo as background, that is blured. I recommend that your f.stop be at least 5.6 otherwise your depth of field may cause you to be out of focus with just leaning forward or back. If you are down to around f.2.0 your nose and your ear will be out of focus if one is in focus. The more depth of field (higher f.stop) the less chance of being out of focus. Of course, the more light you have, the higher you can move the f.stop.

  • Lawrence,

    Great suggestions. I actually had in mind 2-3 meters (that's how my european brain works) and I forgot to translate when I wrote it down. I will amend. I agree that if you have the room, the further the better, which also helps with blurring the background. f2.0 is definitely not recommended. f5.6 is where most lenses are sharp.

  • Thor
    Thor Posts: 2,331 rolemodel rank

    That is super ninja DIY dude, mad props.

  • Great explanation!

    I think most of us have been through some trial and error journey like yourself. I am sure this will be helpful to new instructors. If it is helpful, and easier, you can go on a photo supplier like B&H or Adorama and buy a green screen kit with the green screen, frame, and lights. You can trust that they have matched these. I found it very helpful to have LED lights that are adjustable for both intensity and color temperature (Genaray LED 500bi-color). That makes getting the white balance thing right much easier. I wasted a lot of time on this early on.

  • This is so informative. Thanks for sharing, Greg!

    I've been green screening for some time, but I always have to tweak things when applying the effect, and many times I end up needing to use a special background color (the new background) to camouflage the fringing that results in some parts, from applying the chroma key effect.

    I have always had very clear that the key to green screen is lighting, but I will definitely try some of these suggestions.

  • I had seen a DIY tutorial on how to do a simple box light with 3 different LED color strip and a rheostat so you could change the intensity of each. How do you set your white balance, Lawrence? Grey card?

  • Greg,

    No, I don't use a grey or white card. My lights (see https://www.bhphotovideo.com/c/product/1330381-REG/genaray_spectroled_essential_500_bi_color.html) adjust from 3200k to 5600k. In my camera, I turn off auto white balance and manual adjust the K scale. You would think that by matching both the lights and the camera to 5000k or 4000k for example, you would get the most natural color temperature when recording. However.... it didn't quite work that way. I had to play around, adjusting either the camera or the lights until I found the settings that produced the most natural skin tone. Once you get it right DON'T TOUCH IT!

    By the way, the color shirt you wear makes a big difference. I always wear a blue shirt, which seems to work best given my settings.

  • Gotcha. I agree, once you get the right setting, don't change it!! And yes on the shirt color!! I like the grey because it's neutral. I've worn a blue shirt too in the past, kinda like that too.

  • Ekta
    Ekta Posts: 33 trailblazer rank

    Hi Greg.

    I checked your tips. I am not in a position to invest so much as of now. I have somehow managed to put a green screen and then remove it and add a background. Please chekck the short clip. What i dont like in this test vedio is the edges of the talking head. They are transparent and not upto the mark.

    please suggest something. Is there a way to edit it? I am using cyberlink power director 17.

  • Ekta, can you post the original video with the green screen? I am thinking it's a lighting issue where your screen is too dark but I'd like to see the green video to be sure.

  • That is probably because you set a high tolerance when applying the effect, and you probably needeed to do that because of a lighting issue, as Greg suggested.

  • Ekta
    Ekta Posts: 33 trailblazer rank

  • Ekta
    Ekta Posts: 33 trailblazer rank

  • For a good green screen effect, you need a green background that is uniform in texture, color and light.


    In this case the lines on the wall make you need to increase the effect's tolerance for the background to be completely removed, but that creates the undesired effects you are seeing in the final video.

  • Ekta, The reason you are having fringing around your hair is because you need a backlight. It seem counter intuitive, but in addition to the lights on your green screen and the lights on your face, you need one or two lights pointing above and to the back of your head. I am not sure that I can explain why this is, but it does work. You also may have inadequate light on yourself.

  • I agree with Carlos, you will need to get a flatter green screen. The lines are likely not helping. Try standing a little further away from the screen as well and as Larry suggested, try a light on top of your head (very very low, just to give your hair a little shine). Also, I'm not familiar with the software you are using but there is likely a few settings to change the sensitivity of your keyer. I'm expecting because your screen is not perfectly flat and solid, the software is having to use dark green as a color to make transparent, which in turn is taking some of your hair out as well. Getting a good green screen is very tough and will take several tries.

  • Ekta
    Ekta Posts: 33 trailblazer rank

    Thanks a ton. It really helped. For now I am recording on a normal background. It will take more tries and I will need to learn some editing skills as well. I am giving up the green screen. :(

  • That is a very good decision. A normal background is definitely better than a bad green screen effect.

  • Ekta
    Ekta Posts: 33 trailblazer rank

    Yes, my aim is to get this course out in 2 days. This wll be my first course.

  • That's great. I wish you the best!

  • BatMan
    BatMan Posts: 120 storyteller rank

    Which green screen do you use?

  • Why in two days?

    I am working on my sixteenth course and I expect to take at least three months to complete it.

  • I agree, why the rush? Two days is usually how long it takes me to record and edit about 2 hours of content after having spent weeks creating the course content. Everybody is different but I recommend you set yourself with a reasonable completion timeline for maximum course quality.

  • Ekta
    Ekta Posts: 33 trailblazer rank

    Oh , I meant i want to finish in two days as per the timeline I created for myself. I have been working on this course nearly for one and a half month.

  • Ekta
    Ekta Posts: 33 trailblazer rank

    Yes, totally agree. Even while I started recording, I had to edit the script in between to connect it with all lectures. I am table reading it 5 to 6 times and then recording it two times. After which I edit. It is taking a lot of time for the first time.

    It has taken me nearly 3-4 days to record 15 minutes of total video and editing. I still need to put titles and sync with other material.

    But am enjoying the process and will be thrilled to see the output. Once I complete a lecture its almost like a big sigh....of releif.

  • Ekta
    Ekta Posts: 33 trailblazer rank

    Hello Lawrence,

    Its been almost 2 months now for my course creation. I only meant to push myself to publish the course and not postpone.

    While I was reading the latest posts on how to market my course as I am about to publish this one , I noticed your post on "Plan Your Couse Marketing Before You Publish, Here are Proven Marketing Ideas"

    I read the post and its really awesome. I also noticed and I have a feeling that you quoted my post in that thread. It felt a bit personal to me. Here is what I am reffering to :

    "

    1. When you are planning your first course, shoot your best shot! Your first course will establish your brand and a bad hastily created course is not the way to get started. Your first course should be on a topic in which you have genuine expertise. Take your time to make sure this is a high-quality course. I recently saw a message from a soon-to-be instructor who said they were planning on finishing their first course in two days. I am now working on my sixteenth course and I am taking three months to develop it. Take your time. Get it right."

    I felt hurt and misunderstood. I dont see any reasoning to update and quote me in your posts while making a point.

    I have read your posts and they are filled with knowedge and expertise. And would like to learn more.

    Requesting you to make the change in your post.

    Thanks and Regards,

    Ekta