Audio editing using Audacity tool
Hi All,
In Audacity tool, under Noise removal and repair --> Noise gate -->
any TIPS / Guidelines on how much value to set for below 2 key parameters ?
1. Gate threshold :
2. Level reduction:
Any suggestions, please help...Thanks...
Comments
-
Hello!
Setting parameters in Audacity's Noise Gate tool requires balancing noise reduction without cutting off desired audio. Here are guidelines for the key parameters:
Gate Threshold: This sets the level below which audio is attenuated. Adjust it so that quiet, unwanted noise is reduced without affecting desired audio. Start around -30 dB and adjust based on your audio's noise level.
Level Reduction: Determines how much quieter the gated audio becomes. Set it to reduce noise adequately without making the cutoff too noticeable. Begin with a small reduction (e.g., 6 dB) and adjust to balance noise reduction with natural audio flow.
Experiment with these settings in Audacity, listening for natural audio preservation while minimizing unwanted noise.
Hope this helps!
1